Search results

Thank you good to hear we take allot of pride in making sure customers are happy with our service/results. :)

Customer contacted us for a idle issue and wanted to verify a tune. We strapped the car in and noticed at 6000rpm the car tailed lean 13.0 and we immediately got out of it. We took the car off dyno and after Kevin reviewed the logs, we saw the fuel pumps were maxed out at 4800rpm (Focus pumps)...

Here are the dyno charts SAE and STD

I will post them Monday am when I get to shop. :)

Customer decided to swap out his D1 for a KB. The results came out very well 18psi 600HP 536TQ SAE 624HP 557TQ STD

Customer bought this car from a used car lot. It failed inspection, the headers were crushed, the tune was not in the zip code, the meter was pegged. Kevin cut the bottom of the header off and welded a plate in place and straightened the headers out which is NOT easy. We then replaced the stock...

Re: NY Mustangs Make-A-Wish Show ** Official Thread - June 12, 2010 ** Good stuff we will be there......

Bad ass we are a dealer contact me if your interested on a smoking price including install/custom dyno tuned

Car came in from another shop for some work. The tune was tailing lean and we were not comfortable with it. Kevin had to take blower off and fix the Iat as it was pre blower mods are GT500 Pumps, GT500 55Lb injectors, long tubes, Cai, Slp loudmouth(loud man) Kevin was able to pick up some major...

They talked about but nothing yet, I would be more excited to see the 3.6KB Liquid cooled for 03/04

TVS blower 15psi everything else is stock. 644Hp 637Tq SAE

It really depends. If it is a car with a new combo we have to run the dyno as we need to make sure it is safe AF wise, voltage etc. A example was last week we had a 70 Chevelle SS LS6 the customer wanted to just rent the dyno, we had him sign a release/waiver. We ran the software he drove the...

Installed long tubes and 4.10 Gears (not bad). Enjoy 303Hp 320Tq SAE 318Hp 336Tq STD

Long gone....

Set up right these head units make decent power and if you notice were the power is made, it is in the spot where you are racing. Iat's much lower than a TS, this is a stock engine, stock intake. This is NOTa drop in kit many things on this project are custom made in-house by us. SAE 675HP...

Here is one we just did. 10an fittings, 10an line, custom in house bracket we made.

More...

Some of our custom work thought you would enjoy. For guys running the stock intake there is a HUGE need for a horn like this, so Kevin made one in-house.

Customer may be running a sullivan intake if not a real coupler and we will fab up another one of these pieces we just started making in-house.

Depends how crazy you want to get. We have pulled the valve covers and welded AN fittings right into the valve covers for people that did not care about time/material or cost. You can run plastic 90deg angle fittings into fuel line, I say fuel line as heat does not effect it. The lines run...