Search results

New ABS rings pressed on thanks to West Herr's press Old 28 spline axles vs the new 31 spline Moser units. Axles installed New Driver side rear spring New Passenger side Rear spring with progressive spring rate to help with body roll on launch And if it wasn't for Jeff's extra set of...

Got the rest of the housing painted with 2 coats of POR-15. Gears are installed as well as the new 31 spline Diff. I installed the new axles bearings and seals last night as well. Had some left over paint so I hit the dust sheild and some of the brackets that will be going on the rearend...

I have to take completed pics but here are some pics mid-way through POR-15 the rear end ANNND I made some purchases over the weekend.... `Trickflow R Box Upper intake `90mm Accufab Throttle Body `Anderson Powerpipe 4" intake Here are the parts on the seller's car I also have picked up...

~Auto Meter Instrument Cluster Bezel to hold 2 gauges in. ~Auto Meter Ford Racing Oil Pressure Gauge ~Auto Meter Ford Racing Water Temp Gauge ~Moser Aluminum Diff Cover/Brace ~Moser 31-spline axles ~Summit Remote Battery Disconnect ~Taylor Battery Relocation Kit ~UMI Adj. Rear Upper Control Arms...

Got the rear end apart and ready to take to Vito Stock axles and carrier for sale! lol Cleaned up the cat back for pics for my ads Cleaned up the gas tank too, got some surface rust I'll sand down and fix

The other night I got the rear end out. Last night Jeff and I took it over toe West Herr after hours and power washed it, it came out nice although I don't have any pics since its been cleaned. After it is welded up, the quad shock brackets cut off, and the new axles and carrier are...

I will prolly buy this new since I have yet to come across one for a decent price, but here is the upper intake I'll be using

Made some progress over the weekend.... Hung up the Headers and painted them I put two coats on them so far, might put one more on. Here are my 275/50/15 Mickeys I picked up. I had to get the front of the car on the ground so I went out and got some new rotors for the front. After I...

New o2 Bungs! Choda had the bungs welded shut since he ran a carb, so I had to get some new ones put on last night. Big thanks to Doug. Cutting off the old one Grinding them smooth Little welding action TA Da! Now they are ready for paint...

Welding axle tubes in 8.8 based Mustangs is something as common in the Mustang Drag Racing community as upgrading your axles. I found an article from Mustang 5.0 Magazine showing the build up of an 8.8 rear end step by step. Here are the steps and pictures pertaining to the tube welding. Here...

I almost forgot, here is the block

Can't promise I will be timely with this pics and updates, I usually forget to snap pictures while working on the car. As some of you know I'm doing a motor swap this winter. I am taking out the original 306 and replacing it with a 410 cubic inch windsor. The motor will be: 1994 Lightning...

I'm not sure about on a Mod Motor. I can tell you I ran 24#er's on my h/c/i 302 with a 100 dry shot and it was ok. I also had a 190lph pump in my tank. Fuel pump should be upgraded to atleast a 190lph, but a 255lph costs almost the same so why not put that one in.

So you took a twin turbo mustang to beat a bolt on camaro? big f*cking deal. I hope to God you would win. Thats like saying I took a Mustang GT and beat a Geo Prism. Holy lop sided race. I can't believe you guys are all riding his sack so much on here. Traction problems or not, he...

What are the mods to the mustang and the mods to the Camaro?

HSW is a very good company to use.

wow, what a sh!ty list of colors!!!!!!!!!!! No Green, Yellow, Orange ect.

Now come finish my car!....at least one of us will be at the track rental....i'm getting worried. Nice progress doug

in for pics :)

What else is done to the car?