Finally Fixing the Mach 1...!!!

[teknik]

Here is a link to the vid Stacey took. It is a better video.

[ame="http://s913.photobucket.com/albums/ac338/teknik1136/Fixing%20Car/?action=view&current=VID_20101121_162642.mp4"]Fixing Car :: VID_20101121_162642.mp4 video by teknik1136 - Photobucket[/ame]

 

[lonepalm]

wow Tommy, you've done some awesome work there. Can't wait to see it up close!

 

[MaximumRisk]

looks Great man, congrats on getting her running!!

 

[Wicked One]

WOOO HOOOOO!!!!!

I might have to take a ride out there this week.

Anyone want to come along

 

[Timspony]

Congrats ... boy was that a lot of cranking!!!

 

[Wicked One]

Had to prime the fuel system. It has an 10an form tank to pump then runs to an 8an all the way to the fuel rails, out to the regulator, then a 6an all the back to the tank. A lot of air in there. Plus filling the 100 and 10 micron filters.

Hey, it all worked out there. Congrats Tommy.

 

[Monx]

WOOO HOOOOO!!!!!

I might have to take a ride out there this week.

Anyone want to come along

When are you going??

 

[teknik]

Thanks everyone for the moral support !!!
Quick update....

I had a small oil feed issue to the turbos....It wasn't a big
deal to fix....I just had to swap a couple fittings.
The major problems have been the intercooler water system,
and I didn't like the downpipes too much. Plus they were too
low at the front of the car. So I redesigned them slightly, and
are much much better now. I had to clock the MAF kind of
strange because the car wouldn't stay running and would be
rough with throttle. It is all fixed now. Starts instantly, idles
smooth and revs smooth. I hear a slight tensioner bearing
squeak sometimes and the monster of a fuel pump is
annoyingly loud, but fine from inside the car.
Well......That's everything I have been working on.
I have to button up the front bumper a little more, and then
get my ass on the streets with it.......

I will be looking to meet up on Saturday or Sunday if anyone is free !!!

That's all for now !!! Final Pics coming soon !!!

 

[wildponies]

we can do a little something Sunday Morning.. maybe go into one of the towns and grab some breakfast and a mini cruise!

 

[dsblk93gt]

Where is the MAF located? Any pics?

 

[Wicked One]

I'm good to go Tommy and Steve

The MAF in located in the fender well and was at 11'o clock, I am sure it needed to be clocked some more since it isn't a 360 degree sampling MAF.

let me know guys, call me.

 

[teknik]

The MAF is actually in the stock location. I had to clock it with the
electronic side to the 3 o'clock position. Strange, but that is the only
way it seems to run like normal.

Pics on the way.

 

[teknik]