Starter solinoid/starting/its a mess

[Gingerbreadman]

whats up guys,this car was a 4cyl auto but i converted to 5sp efi 5.0,

im wonderin if anyone has a picture of ther starter solinoid cause i have a mess of wires and have no idea where they go?
since theres no clutch switch what should i do about that,will it start anyway?
and finaly i have 3 wires comin off the harness right by the EEC,it ran inside and cliped to somethin else under dash by fuse box,but idk if it did anything?
ill try to get pics of my mess tomaro so everyone can see

any help would be appriciated,id like to make it to some events before its all over

 

[Gingerbreadman]

???

 

[TBapp3]

Wish I could help ot...Im sure someone will chime in!!

 

[BlackOut2k11]

Are you using the old style large case starter (3180) or the gear reduction type (3205)?

 

[Gingerbreadman]

im usin the stock one,its new, doesnt the starter only have 1 wire,cause thats all i got goin to it, maby rig up a push button? i got all the lights to work dash lights up,but the eec isnt getting power either cause my tweecer wont read it, i stole my sisters digital so im gonna take pics of this mess of wires,i just dont want to short anything out

 

[Gingerbreadman]

these are the wires that come out of the 86 efi harness i just put in

thats the whole mess

and this is the wire i said came off the computer,but see the clip was already plugged in and i swapped it to the 86 harness,,the one i took it off u can see its just up and to the left just hangin there,i have no idea what this does????? i dont even know where to start

 

[Gingerbreadman]

im guessing im on my own,,can i atleast get a pic of someones starting solinoid please someone,,,i know theres more then 1 5.0 in this club

 

[EHA Racing]

Wow what a mess. On the solenoid it looks correct. The "s" terminal that single wire is hooked to will come from the neutral safety switch. It applies 12V to "close" the solenoid and give power to the single wire going to the starter. What trans are you using now? Do you have a neutral safety or a clutch switch?
As far as the plug goes I cant say by just looking at a picture. There are about 10 plugs similar to that on a fox. You will have to get out a multimeter and find where each wire goes.

 

[Gingerbreadman]

im running the tremec t-5 ,theres no switch on the clutch pedal and idk about the neatral switch cause it was 4cyl auto then carbed v8 with aod, and now its all the stuff out of my old 86 efi,theres a couple plugs that r just hangin there by the trans, maby ground one of those, what does that little wire on the solinoid get a power signal,can i just hook it to a switch,switches r cool

 

[Gingerbreadman]

ok so i got a new battery and i hooked some stuff up and the door chime is very low i can barley hear the noise,i have no headlights,and it wont start,wont even click,so i tried jumping the solinoid with my pry bar and all it did was spark,im so confused,theres so many wires, my fuel pump and fans are on a switch would that have anything to do with it,,can i just put a switch on the starter solinoid???