Slim Ballast HID Kits for all Vehicles ......

HID_Guy

HID_Guy

Well-Known Member
#1
#1
- We have been in business for the past 2 going on 3 years now and are glad to bring and offer to you what no other HID Kit Distributor can with our very High Rated Customer and Tech Service, and not to mention our Lifetime Warranty which is the easiest to work with.

- We offer only the highest quality Slim Ballast Digital HID conversion kits in the industry, made only with the highest quality digital HID ballasts and HID bulbs, in stock for All Mustangs and basically any other On and Off-road vehicle you can think of. Also we stock all LED Bulbs for basically any application on all vehicles.

** Super Slim Ballasts; less than half the size of basically every HID ballast on the market, makes for the easiest install on the market.
** Built in Digital Relays and Ignitors for the best performance, and only the highest quality digital technology available for HID's to this moment.
** Free Priority Mail Shipping to ALL of the United States.
** Lifetime Warranty on all parts no questions asked.


- Visit our website at www.HIDGuy.net or give us a call any day at any time and place your order right now. Best customer and tech service in the industry. You may also e-mail us at Sales@HIDGuy.net with any questions. We will respond ASAP .....

For already pre-set easy to find Mustang HID kits, Mustang LED Bulbs and Parts visit us at www.VenomousStangz.net ......


HID Bulb Types: H1, H3, H4 ( 9003 ), H6, H6M, H7, H8, H9, H10, H11, H11B, H13 ( 9008 ), 5202 ( H16 - 9009 ), 880, 881, 9004, 9005, 9006, 9007, D1R, D1S, D2S, D2R, D2C, D4S


Thanks,


- HID Guy
 
Last edited:
HID_Guy

HID_Guy

Well-Known Member
#4
#4
BadA55f0Xxx said:
I was looking at the bi-xenon hi and low are they hard to install I have no experience?? Thanks
Click to expand...

Nope, very simple still plug-and-play install, just one harness that controls both HID ballasts and a few ring terminals that go to your battery and any ground on the vehicle; no complaints so far, plus no cutting or splicing in any way required.
 
BadA55f0Xxx

BadA55f0Xxx

Well-Known Member
#8
#8
My battery is in the trunk n I have a kill switch but that won't b a problem rite I would just need 2 have longer wires from the back of the car 2 the headlights?
 
W

Wicked One

Super Moderator / Member Plus / Formally Wicked Xt
Staff member
NYM Staff
#9
#9
Correct. I would not suggest tapping into anything, just go directly to the battery.
 
HID_Guy

HID_Guy

Well-Known Member
#10
#10
BadA55f0Xxx said:
My battery is in the trunk n I have a kill switch but that won't b a problem rite I would just need 2 have longer wires from the back of the car 2 the headlights?
Click to expand...

That might be an issue just for wire length, but make sure the wire you use to extend to the trunk has good insulation and is the same gauge as on the Hi and Lo harness and you will have no issues, if you get the single beam kit you will have no need for the wiring, but if you want the Hi and Lo that is the route for sure.
 
HID_Guy

HID_Guy

Well-Known Member
#13
#13
HUGE 5 Day Sale is almost over guys, if you're interested let us know or if you have any questions let me know, more than glad to help.







HID Bulb types we carry: 9040, 9050, 9055, 9140, 9145, hb1, hb2, hb3, hb4, hb5, 880, 881, 884, 885, 886, 889, 890, 893, 894, 896, 898, 899, h1, h3, h4, h6, h6m, h7, h8, h9, h10, h11, h11b, h13, h16, 9009, 5202, 9003, 9004, 9005, 9006, 9007, 9008, 9011, 9012, d2s, d2c, d2r, d1s, d1r, d1c, d4s, d4c, d4r, h4h.
 
You must log in or register to reply here.