if ur planing a pi swap check this out

[MR99SVTCOBRA]

hey guys thought id help out this was really helpful to me cus i dont know crap lol .....hope it helps u too check it out it explains everything and other peoples results

http://www.dereklikescars.com/headswap/

 

[flamingcobra95]

if i was to get the pi swap would i still be able to bore it .030 over? my budy says i should ahve it bored that way

 

[jrmandryck]

You can bore it if you want. Boring the cylinder walls has nothing to do with the heads. The only semi relation is that the new pistons and heads will determine your compression ratio. Also be sure to check for valve clearance before starting the motor because not having the proper clearance can result in either detonation or snapping stems.

 

[MR99SVTCOBRA]

once u do the swap ur going to have 10:1 compression

 

[SSChris NY.]

Good info. Thank U for sharing

 

[flamingcobra95]

thanks guys

 

[MR99SVTCOBRA]

ur welcome ......I'm doing the swap when I'm done with my trany

 

[flamingcobra95]

awesome let me know how the performance wise works out....i got so much to do to mine...looking for ecu and wiring harness plus the t45 UGHHHHHH! lol