Search results

How To Strip or Add Stripes to A / Your Mustang Materials: Water Spray bottle Dishwasher Detergent Squeegee Tape Measure Electrical tape Scissors 10mm nut driver (If you want to remove spoiler) Another human 1.) First thing you want to do is wash the car real good, and if wax...

Sound Deadening a Mustang w/ Dynamat (or similar product) Reducing Road Noise in a Mustang Convertible With the top up and windows...

Install Short Throw Shifter - Mustang GT Short throw shifter diy install, how to install a short throw shifter, shifter write up REMOVING THE FACTORY SHIFTER Note: this install is shown on my 1997 Cobra. Fox owners will...

The Seafoam Tutorial on a Mustang There's this stuff called Seafoam that you can buy it at your local autoparts store. It cleans out all the carbon in your engine and is supposed to help it run smoother, so I decided to...

How to make a Rear Seat Delete for your Mustang By: -=NightHawk=- What you need: 1. 3...yes three 2x4 1/2 inch thick pieces of MDF 2. 80 Grit Sandpaper 3. 2 Heavy-duty hinges (from the cabinet isle...plan to install them reversed...

How to change rear brakes on a Ford Mustang Write-up by: 006 Looks like a piece of cake eh? Nah, really, looks like tough stuff to lots of people, but it's VERY easy. It actually is, and if you...

How to install a Raptor shift light on a Ford Mustang Write-up by: envente289r Here is my new Raptor Shift Light, all ready to be installed. I decided to mount the light...

How to install a Ram-Air / Cold Air Intake on a Ford Mustang GT SN-95 Ram Air/Cold Air a corral original article...

How to polish your brake calipers - Ford Mustang Tools Needed: Drill (Electric preferred) Dremel Rotary Tool Dremel Sanding Bands (60 / 120) 511E EZ Lock Finishing Abrasive Buffs - 180 & 280 grit (2 Pack)...

Upper Intake Plenum Install on a Mustang GT Tools needed: 1/4" and 3/8" drive ratchets with extensions 8mm socket, 1/4" drive 10mm socket, Deep Well and regular, 1/4" AND 3/8" drive Phillips head screwdriver...

Installation of Oil Pressure and Water Temperature Gauges Why is this necessary? The 2000 Mustang oil pressure sending unit is...

How To Replace O2 Sensors For some of you Mustang folks out there who may be new to wrenching, here is a relatively simple project that can improve the performance of your Mustang. If your car has over 100,000 miles and still has the original oxygen sensors, it wouldn't be a bad idea...

How to install a nitrous kit on a Ford Mustang GT Write-up by D&D Auto Detailing: http://www.dndgarage.net/ NX Install...

How To Make MIL Eliminators for your Mustang I recently acquired a bassani O/R X pipe and decided to do some research and learn how to make my own MIL Eliminators. Since the O2 bungs were located pretty far back on the bassani pipe, I would also have...

How to clean your MAF (Mass Airflow) So, your car is detonating, running poorly, or you are getting abnormal gas mileage, it may just be time to clean your MAF. NOTE: This write-up is showing how to clean a MAF on a modular 4.6L. Yours may be different, requiring different...

How to install long tube headers on a 99 - 04 Mustang GT By Eric Jobe BBK Long Tube Header Install on a 2001 GT Just...

How to install long tube headers on a 99 - 04 Mustang V6 Found at: http://www.moddedmustangs.com Ford Mustangs are famous for having a very accepting aftermarket. The GT and Cobra Mustangs have always...

Step 6 Here is the long black piece attached to the bezel and the hole that the 8mm screw goes in. Step 7 After the bezel is removed and carefully set down to avoid scratches...

Step 11 Reinstall the two T-15 Torx headed bolts into the clusters bezel and vwalah! or walah! or.... you get the point. So, we have no completed the gauge cluster LED swap! If you are continuing on and doing...

Step 5 Once the two connectors are unplugged from the back of the cluster, carefully pull the cluster out. (It helps if you have the wheel tilted as low as it can go). From there, flip the cluster over and notice the 5 black TWIST...