Media added by Mike65

Navigation

Browse albums
2/9/18 Finished the custom r/s Mach-1 dash panel.

2/9/18 Finished the custom r/s Mach-1 dash panel.

  • 0
  • 0
2/9/18 Covered the connections on the power distr block & circuit breakers with heat shrink tubing.

2/9/18 Covered the connections on the power distr block & circuit breakers with heat shrink tubing.

  • 0
  • 0
2/9/18 Covered the connections on the grounding block with heat shrink tubing.

2/9/18 Covered the connections on the grounding block with heat shrink tubing.

  • 0
  • 0
2/4/2014 Rosie in the snow.

2/4/2014 Rosie in the snow.

  • 0
  • 0
2/4/18 Cut & capped the unused wires from the ignition box.

2/4/18 Cut & capped the unused wires from the ignition box.

  • 0
  • 1
2/3/18 Finished the f/e horn & lighting wiring.

2/3/18 Finished the f/e horn & lighting wiring.

  • 0
  • 0
1/30/18 Hooked up the wires to the plugs for the l/s & r/s hi & low beam head lights, & r/s turn signal.

1/30/18 Hooked up the wires to the plugs for the l/s & r/s hi & low beam head lights, & r/s turn signal.

  • 0
  • 0
1/30/18 Hooked up the wires for the l/s turn signal.

1/30/18 Hooked up the wires for the l/s turn signal.

  • 0
  • 0
1/28/15 Rosie in the snow.

1/28/15 Rosie in the snow.

  • 0
  • 0
1/28/18 Hooked up the wires to both horns.

1/28/18 Hooked up the wires to both horns.

  • 0
  • 0
1/28/18 Hooked up the brake warning switch.

1/28/18 Hooked up the brake warning switch.

  • 0
  • 0
1/28/18 Hooked power wire to the washer pump.

1/28/18 Hooked power wire to the washer pump.

  • 0
  • 0
1/22/18 Wrapped the harness to the rear & ran it through to the trunk.

1/22/18 Wrapped the harness to the rear & ran it through to the trunk.

  • 0
  • 0
1/21/18 1999 Explorer Sport 4x4, & 2000 Ranger Extd Cab 4x4 by our house.

1/21/18 1999 Explorer Sport 4x4, & 2000 Ranger Extd Cab 4x4 by our house.

  • 0
  • 1
1/18/18 Installed the ignition box & started running the wires.

1/18/18 Installed the ignition box & started running the wires.

  • 0
  • 0
1/17/18 Pertronix Digital HP ignition box arrived today.

1/17/18 Pertronix Digital HP ignition box arrived today.

  • 0
  • 0
1/16/18 Storing the fenders for the coupe.

1/16/18 Storing the fenders for the coupe.

  • 0
  • 0
1/12/18 All the front lighting wires & horn wire in temp spots until the f/e sheet metal is installed.

1/12/18 All the front lighting wires & horn wire in temp spots until the f/e sheet metal is installed.

  • 0
  • 0
1/12/18 I drilled a 7/8" hole in the lower part of the l/s front inner fender panel & ran the harness back into the engine compartment & through the h

1/12/18 I drilled a 7/8" hole in the lower part of the l/s front inner fender panel & ran the harness back into the engine compartment & through the h

  • 0
  • 0
1/12/18 I drilled a 7/8" hole in the l/s rear inner fender panel just below & forward of the hood hinge & ran the harness through a grommet out under

1/12/18 I drilled a 7/8" hole in the l/s rear inner fender panel just below & forward of the hood hinge & ran the harness through a grommet out under

  • 0
  • 0
1/10/18 Solenoid wires come back into the engine compartment through the r/s front inner fender panel below the starter solenoid.

1/10/18 Solenoid wires come back into the engine compartment through the r/s front inner fender panel below the starter solenoid.

  • 0
  • 0
1/10/18 Solenoid wires routed under the fender.

1/10/18 Solenoid wires routed under the fender.

  • 0
  • 0
1/10/18 Ran the wires to the solenoid across the top of the firewall through the r/s rear inner fender panel just below the r/s hood hinge.

1/10/18 Ran the wires to the solenoid across the top of the firewall through the r/s rear inner fender panel just below the r/s hood hinge.

  • 0
  • 0
1/9/18 Started wrapping the the wires under the hood into separate harness's.

1/9/18 Started wrapping the the wires under the hood into separate harness's.

  • 0
  • 0