Freedom from repression!!!!!

Ghostly Echo

Ghostly Echo

Member Plus / One of the first
#1
#1
Here it is my new setup yea yea its not on the car yet but isn't she pretty
I plan to do a blackout on the pipes and mufflers and leave the chrome tips shining :awesomework:

Special thank to jarred for the low price on the pipes and mufflers and to redmosses for giving me the pypes x-pipe for free!!!!







NEW UPDATE I AM JUST MISSING TWO PIECES

I got the hangers today i snaked someone on ebay it came out to be 35 bucks shipped Special thanks goes out to 48prerunner for showing me them on ebay :ilovenym:
These are the same ones american muscle sells for 60 plus shipping :thumbsdown:


 
W

Wicked One

Super Moderator / Member Plus / Formally Wicked Xt
Staff member
NYM Staff
#11
#11
Looking good man, now all you need is the rear bumper and these.




Not a joke, there are 6 there and they are forged. good luck man.
 
4

48prerunner

Well-Known Member
#17
#17
Just cut your rear bumper you can download the template from pypes website. you also need to pick up a band clamp from napa for the driverside midpipe to x pipe. about $12.

If your not going to weld the x pipe to the cats i would band clamp that too. the clamps you have on there now crush the pipes and are a pain if you ever need to take it off. also those hangers that are on the x are not needed if they dont line up just cut them off. if the x is from a gt they wont line up. those hangers are juts for installation and ford has done away with them.

also dont bother switching out the pass side mid pipe same pipe you have on there now. you can slip the driverside pipe in without a lift if you turn it just right.
 
Ghostly Echo

Ghostly Echo

Member Plus / One of the first
#18
#18
48prerunner said:
Just cut your rear bumper you can download the template from pypes website. you also need to pick up a band clamp from napa for the driverside midpipe to x pipe. about $12.

If your not going to weld the x pipe to the cats i would band clamp that too. the clamps you have on there now crush the pipes and are a pain if you ever need to take it off. also those hangers that are on the x are not needed if they dont line up just cut them off. if the x is from a gt they wont line up. those hangers are juts for installation and ford has done away with them.

also dont bother switching out the pass side mid pipe same pipe you have on there now. you can slip the driverside pipe in without a lift if you turn it just right.
Click to expand...
k cool thanks for the info i should have it done this week. Also i know the band clamp needs to be 2.5" but how long should i get it ?:confused:
 
4

48prerunner

Well-Known Member
#20
#20
I was looking for the part number but could not find it I just told them I wanted a 2.5 " band clamp or some people call it a strap band clamp. The one I got was the same length as the ford clamp just didnt have the alignment notch which you dont need. when i cut my rear bumper i used a dremel and a cut bit from homedepot, but I know people have used everything from an x-acto to tin snips. It cuts really easy, plus if you mess up all the more reason to buy that cali special rear bumper. I have the FRPP exhaust cut out covers on mine.
 
You must log in or register to reply here.