Lost interest in building a seriously fast car and moving in a completely different direction so my loss is your gain.. Dont worry guys its still a Ford 
The car is a 1993 Mustang coupe roller that is ready for wiring and a drivetrain.. This is a brand new chassis.. Never been down the track and all the parts installed are brand new
-The cage is mild steel with X Bracing underneath and has been 8.50 certified for another 2 years
-Jerry Bickle Parachute mount
-4 link suspension
-9" rear (no center section)
-Strange 40 spline axles
-Strange coil overs w/ Caster/Camber plates
-Aerospace brakes
-Full tubs
-Extended rear wheel wells
-M/T 17x33 slicks mounted on 15x15 Weld Pro Stars
-M/T front runners on 15x4 Weld Pro Stars
-Chassis has full sheetmetal tinwork inside stem to stern, everything was painted non glare black and has been seam sealed.
-Interior will come with removeable steering wheel, gutted dash, door panels, B&M Quarterstick shifter for a powerglide, 5 gallon water tank for Liquid to Air intercooler applications and seat (Very Spartan LoL)
-Removeable trunk lid, 6" extended cowl hood and GT Front nose.
-AJE Universal K member and control arms (I will give 302/351 motor mounts for it if you need them)
-Wilwood manual rack
-RCI 5 gallon fuel cell
- -10 fuel line and -8 return
-Flaming river battery relocate switch and the power cable goes to the front of the car
-Crossmember for a powerglide
-Shorter Fluidyne radiator
-Brand new headlights and smoked tailights
-Brand new Cobra rear bumper
-Chromoly 60" wheelie bars
The car is sitting in black primer.. I just had ALL the bodywork done on it so it is ready for paint.. The only bad thing is this car was supposed to be a turbo car and the hole for turbo has been cut out on the front bumper already.. Also because of the extended wheel wells the Cobra rear bumper had to be trimmed and it will need to be DZus'ed on to hold it in place.. I will supply you with the fasteners for that also.. All the body moldings will come with the car too.
I kept the firewall and radiator support and did not install the wheelie bars as I was not sure of the direction this car was going in..
I have plenty of pictures available but I would prefer to email as it is in a .zip file
$7500 OBO.. Open to trades as well..
Thanks
Dennis
917-578-6012
kwiksc@gmail.com
The car is a 1993 Mustang coupe roller that is ready for wiring and a drivetrain.. This is a brand new chassis.. Never been down the track and all the parts installed are brand new
-The cage is mild steel with X Bracing underneath and has been 8.50 certified for another 2 years
-Jerry Bickle Parachute mount
-4 link suspension
-9" rear (no center section)
-Strange 40 spline axles
-Strange coil overs w/ Caster/Camber plates
-Aerospace brakes
-Full tubs
-Extended rear wheel wells
-M/T 17x33 slicks mounted on 15x15 Weld Pro Stars
-M/T front runners on 15x4 Weld Pro Stars
-Chassis has full sheetmetal tinwork inside stem to stern, everything was painted non glare black and has been seam sealed.
-Interior will come with removeable steering wheel, gutted dash, door panels, B&M Quarterstick shifter for a powerglide, 5 gallon water tank for Liquid to Air intercooler applications and seat (Very Spartan LoL)
-Removeable trunk lid, 6" extended cowl hood and GT Front nose.
-AJE Universal K member and control arms (I will give 302/351 motor mounts for it if you need them)
-Wilwood manual rack
-RCI 5 gallon fuel cell
- -10 fuel line and -8 return
-Flaming river battery relocate switch and the power cable goes to the front of the car
-Crossmember for a powerglide
-Shorter Fluidyne radiator
-Brand new headlights and smoked tailights
-Brand new Cobra rear bumper
-Chromoly 60" wheelie bars
The car is sitting in black primer.. I just had ALL the bodywork done on it so it is ready for paint.. The only bad thing is this car was supposed to be a turbo car and the hole for turbo has been cut out on the front bumper already.. Also because of the extended wheel wells the Cobra rear bumper had to be trimmed and it will need to be DZus'ed on to hold it in place.. I will supply you with the fasteners for that also.. All the body moldings will come with the car too.
I kept the firewall and radiator support and did not install the wheelie bars as I was not sure of the direction this car was going in..
I have plenty of pictures available but I would prefer to email as it is in a .zip file
$7500 OBO.. Open to trades as well..
Thanks
Dennis
917-578-6012
kwiksc@gmail.com
Last edited:
